THERMA-FLOORŪ Heated Flooring Solutions
Maxxon's Therma-Floor is a gypsum underlayment designed to pour over hot water tubes or electric heating cables. It acts as the thermal mass for any radiant floor system including Maxxon's own Infloor® Heating Systems. Therma-Floor encases the tubes or cables in crack resistant, non combustible gypsum. Its special formula resists breakdown to 150°F (66°C). And because it's poured only 1-1/4" (32mm) thick, the heating system is more responsive and comfortable.
THERMA-FLOORŪ TECHNICAL DATA:
| Compressive Strength: | Typical range of 1,600 to 2,500 psi (11.0 to 17.2 MPa) |
| 'K' factor: | 4.96 BTU/(h - ft2 - °F) (.7142 W/[m - °C]) |
| Specific Heat: | .224 BTU/(lb - °F) at 85°F (.9385 kJ[kg - °C] at 29.44°C) |
| Weight: | At 1-1/4", less than 12 lbs./sq.ft. (At 32 mm, less than 58.7 kg/m2) |
| Dry Density: | 115 lbs./ft3 (1840 kg/m3) |
| Point Loading: | Typical loading of up to 2,000 lbs. on a 1" (910 kg on a 25.4 mm) diameter disc |
| Surface Burning Characteristics: | Flame spread: 0 Fuel contributed: 0 Smoke density: 0 |
